BGYYG - CASTALL RT-7, PART B
- MSDS: BGYYG
- Manufacturer: CASTALL INC
- Product Name: CASTALL RT-7, PART B
- National Stock Number: 8040-00F008920
Product Identification
Product ID:CASTALL RT-7, PART B
MSDS Date:10/23/1987
FSC:8040
NIIN:00F008920
MSDS Number: BGYYG
Responsible Party
EAST WEYMOUTH, MA 02189
Emergency Phone: (617) 337-6075
Info Phone: (617) 337-6075
Cage: FO378
Contractor
Telephone: (617) 337-6075
Cage: FO378
Ingredients
POLYGLYCOL DIAMINE
CAS: 69136-21-6
RTECS: KC8925000
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: MAY CAUSE SEVERE IRRITATION
W/CORNEAL INJURY WHICH MAY RESULT IN PERMANENT IMPAIRMENT OF
VISION/EVEN BLINDNESS. SKIN: MAY CAUSE BURNS & ALLERGIC REACTION.
INHALATION: MAY CAUSE IRRITATION TO UPPE R RESPIRATORY
TRACT/SENSITIZATION OR ASTHMA IN SUSCEPTIBLE INDIVIDUALS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE: MAY CAUSE SEVERE IRRITATION W/CORNEAL
INJURY WHICH MAY RESULT IN PERMANENT IMPAIRMENT OF VISION/EVEN
BLINDNESS. SKIN: MAY CAUSE BURNS & ALLERGIC REACTION. MAY CAUSE
IRRITATION TO THE UPPER RESPIR ATORY TRACT/SENSITIZATION OR ASTHMA
IN SUSCEPTIBLE INDIVIDUALS.
Medical Cond Aggravated by Exposure:ALLERGIC SKIN REACTION/BURNS.
First Aid
First Aid:EYE: FLUSH W/WATER FOR 30 MINS, PROMPT MED CONSULTATION IS
ESSENTIAL. SKIN: REMOVE THE UNCURED PRODUCT W/DRY CLOTH/TOWEL, WASH
THOROUGHLY W/SOAP & WATER. CONSULT PHYS IRRITATION DEVELOPS. DON'T
USE A SOLVENT TO REMOVE PRODUCT. INHALATION: REMOVE TO FRESH AIR.
CONSULT PHYS. INGESTION: DON'T INDUCE VOMITING. GIVE LARGE AMOUNTS
OF WATER/MILK IF AVAILABLE/TRANSPORT TO MEDICAL FACILITY.
Fire Fighting
Flash Point Method:COC
Flash Point:335F
Extinguishing Media:SAND, ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:DURING A FIRE IRRITATING/TOXIC GASES MAY
BE PRESENT FROM THE DECOMPOSITION/COMBUSTION PRODUCTS.
Accidental Release
Spill Release Procedures:COVER SPILLS W/DRY ABSORBENT MATERIAL SUCH AS
SAND OR SAWDUST; SCOOP UP & PLACE IN AN APPROPRIATE CONTAINER.
Handling
Handling and Storage Precautions:STORE IN DRY AREA AWAY FROM EXCESSIVE
HEAT. GROUND ALL TRANSFER EQUIPMENT. HOLD BULK STORAGE UNDER
NITROGEN BLANKET.
Other Precautions:THIS PRODUCT SHOULDN'T COME INTO CONTACT WITH COPPER
OR COPPER-BEARING ALLOYS.
Exposure Controls
Respiratory Protection:USE A FULL-FACE RESPIRATOR.
Ventilation:LOCAL EXHAUST/USE ONLY WITH ADEQUATE VENTILATION.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:BOOTS, APRON, FULL BODY SUIT, SAFETY SHOWER.
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING/LAUNDER SEPERATELY
BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:735F
Vapor Pres:.001
Vapor Density:0.6
Spec Gravity:1.01 G/CC
Solubility in Water:COMPLETELY
Appearance and Odor:LOW VISCOUS LIQUID; AMBER; MILDLY AMMONICAL ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
ACID, OXIDIZING MATERIALS, HALOGENATED ORGANIC COMPOUNDS.
Stability Condition to Avoid:MOISTURE & EXCESSIVE HEAT
Hazardous Decomposition Products:NITROGEN OXIDES
Disposal
Waste Disposal Methods:LANDFILL/INCINERATE UNDER CONDITIONS WHICH MEET
FEDERAL, STATE & LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.